Commercial
Industrial 26inch Drum Fan
|
|
Industrial 26inch Drum Fan High quality metal construction & hard wearing coating. This is the ideal solution for dissipating excess heat in commercial or industrial situations, clearing dust from a worksite or for use on film sites for cooling or creating "wind". |
|
Fan Diameter: 660mm(26”) Speeds: 3 Speed Range: Low speed 1,000rpm, medium speed 1,150rpm, high speed 1,290rpm Maximum Air Flow: 210m³/min - 12600m³/hr Maximum Power: 295W Supply: 230V – 50Hz Current: Low speed 1.285A, medium speed 1.152A, high speed 1.039A |
| This is the ideal solution for dissipating excess
heat in commercial or industrial situations, clearing dust from a
worksite or for use on film sites for cooling or creating "wind".
It is also ideal for pushing high volumes of air through a property to
assist in drying a flooded house.
Made with high quality metal construction and an extra hard-wearing coating, it is a very tough piece of equipment. With wheels at one side and two handles on the top, it is very easy to manoeuvre into position. The fan itself will tilt on it’s based through 360 degrees to provide air movement precisely where you need it. The controller is mounted on the rear of the fan and has three settings - low, medium and high. |
| Mon 9:00AM - 12:00PM | Closed |
| Tue 9:00AM - 12:00PM | 2:00PM - 5:30PM |
| Wed 9:00AM - 5:30PM | Open All Day |
| Thu 9:00AM - 12:00PM | 2:00PM - 5:30PM |
| Fri 9:00AM - 12:00PM | 2:00PM - 5:30PM |
| Sat 9:00AM - 12:00PM | 2:00PM - 5:30PM |
| Sun Closed |
| Place your non-binding enquiry and our staff will get in contact with you. |
|
